Tyre Pressure Monitoring System - TPMS 2-way Rechargeable Solar Display

Steelmate TPS9i TPMS - FOR ULTRA LOW PRESSURE MONITORING Key Features:

The TP-S9i tyre pressure monitoring system has a solar powered dashmount Colour display and is supplied with four internal sensors which displays the tyre pressures of all four tyres in BAR or PSI.

The system monitors both tyre pressure and tyre temperature, and will alert the driver of leaks, punctures and over-heating (over 80 Degrees Celcius)

In addition, the alarm threshold of pressure can be set and adjusted by the driver.

The system can monitor tyre pressure

from as low as 0.9Bars,up to 6.0 Bars, which suits a wide range of vehicles.

All sensors come pre-paired to the correct

wheel position and are labelled for easy installation.

Features Wireless transmission, no wire connection is needed. Intelligent sleeping mode for power saving. High temperature and low battery,visual and audible warning. Variable pressure unit (PSI or Bar). Long battery life (?5 years)

Technical Specifications

Professional Sensor:

Military Spec Battery

Operating Frequency: 433.92MHz ± 0.05MHz

Operating Voltage: 2.0~3.8V

Operating Temp.: -40°C~+105°C / -40°F ~ + 221°F

Battery Life: ?5 years

Weight: 44g ± 1g

 Display:

Operating Frequency: 433.92MHz ± 0.05MHz

Operating Voltage: 12 ± 3V

Operating Temp: -40°C ~ +85°C / -40°F ~ +185°F

Programming Sensors to the display:

NOTE: ALL TPMS kits & packages sold by us will be pre-programmed so the customer does NOT need to program the sensors. For Internal sensors though, when tyre rotation occurs, the customer will need to program the sensors to the display. There are two methods:

Method 1. Install the sensors, make sure the display is in programming mode (see manual), inflate/deflate the tyres a little according to instructions on the manual. The sensor should register the pressure change and send signals to the display. Save the sensor data on the display.

Method 2. Purchase an internal sensor partner (available on our website). Make sure your sensors are installed & display is in programming mode. This device will prompt the sensors to send out the signals without having to inflate/deflate the tyre. Save the sensor data on the display.

What's in the box
1 x Solar Display, 4 x Internal sensors